Advertisement
Step Five
Insert the Front Legs (7)x2 into the pre-drilled holes on the underside of the Headboard (1) and twist to secure, as
shown in the diagram below.
Step Six
Attach the Metal Plate (16) to the bottom of the Footboard (2) using Bolts M6 X 25mm (I) x2. Do not tighten the bolts
until you make adjustment for the screw hole at the Side Rail (3). Insert Wooden Leg (7) into the bottom of the
Metal Plate (16) using M8 Spring Washer (G) and M8 Nut (M). Hold the M8 Nut (M) using M13 Spanner (N) and twist
the Wooden Leg (7) to secure in place. Repeat for other leg.
For Footboard Only
M6 x 25mm (I)
1
16
3
M4 (A)
M6 x 25mm (I)
3.5 x 30mm (L)
G.
7.
M8 Spring
Washer x 2
Legs x 2
7
STEP 1
M4 (A)
M6 x 25mm (I)
Yellow sticker
face down
3.5 x 30mm (L)
M6 x 25mm (I)
1
16
3
16.
N.
Metal plates x 2
M13 Spanner x 1
3
1
AFTER INSERTING BOLT M6 x 25MM,
MAKE ADJUSTMENT FOR SCREW HOLE,
THEN INSERT THE SCREW 3.5 X 30MM.
TIGHTEN THE BOLT M6 x 25MM
FIXINGS FULLY.
TWIST WOODEN LEG ONLY
WITHOUT MOVING THE M8 NUT,
SPRING WASHER AND SPANNER
STEP 2
M8 Spring
Washer (G)
3
M13 Spanner (N)
M.
L.
Screw
M8 Nut x 2
3.5 x 30mm x 2
6/10
7.
Legs x 2
1
16
7
Twist the wooden leg
x2
I.
A.
M6 X 25mm Bolt x 4
M4 Allen Key x 1
Advertisement
