JRC JUE-87 Instruction Manual page 21

* Refer to Chapter 3.2.2 for the contents of the message.
Ready Rec(POR): Good-15
Position: N 35°34' E 139°50' Course: 120deg Speed: 10.0kn
Editing: SSAS message 1
TO:jmarine@m1.jrc.co.jp
TO:jmarine1@m1.jrc.co.jp
CC:jmarine2@m1.jrc.co.jp
SUBJECT:Security message
<One blank line>
This is SSAS message.
SHIP NAME: JRCMARU
MMSI:431995000
[End of File ]
F1:Insert Off
[Setting of Security Alert]
Step 17 Press <Enter>, select "oN" by pressing the up/down arrow keys, and then press <Enter>.
e.g.
Security Alert: oN
When "oFf" has been selected, Message is NOT sent although anyone press the security button.
Step 18 Setup is completed, and then press function key10 <F10> to finish the setup.
Step 19 Press function key10 <F10> or <ESC> to save the setup.
An example of setup of Security Alert transmission by the procedure described above is shown below.
Fig.3.2.1k Setting Example of Security Alert Transmission
Line:1 Column: 1
F2:Ins_Line F3:Block
F7:Quit F8:Save As
Fig.3.2.1j SSAS Message Editing Window
Security Alert transmission #1
requesting Interval
lEs
Network type
Prefix code
Destination code &
subscriber's number
Character code
SSAS message
Security Alert
3-7
20 JUN,12 13:00(UTC)
at 13:00(UTC)
Size: 20
F4:Del_Word
F9:Save & Quit
: 1 hour
: 003-103-203-303
: E-mail
: 00
: 28
: Ia5
: TO:jmarine@ml.j...
: oN
F9:Cancel F10:Save
Insert: ON
3
F5:Del_Line
F10: - Others -