D-Link DIR-655 Quick Start Manual page 2

Note: This wizard will only appear at the first configuration. If your router has been configured previously, you
will need to reset it to go through the setup.
Reset Procedure: With the router powered on, Press and hold the reset button (on the back of the router) for
10 seconds and release. The lights on the front of the router should all flash and reboot.)- Repeat step 5
The DIR-655 will perform a scan to determine the type of internet service you have. If successful, the Internet
Setup will be skipped.
If the scan was not successful, you will be prompted to select your Internet Type:
DHCP Connection (Dynamic IP Address) - Cable Internet Service (Rogers,Shaw,Cogeco, Videotron, Teksavvy)
Username / Password (PPPoE) - DSL Internet Service (Bell Sympatico, Teksavvy DSL, Sasktel,Acanac)
Username: Your Internet username (Provided by your Internet Service Provider)
Password: Your Internet Password (Provided by your Internet Service Provider)
Next is your Wireless Settings. Enter a New Wireless Network Name and Password. This password is what you will
need when connecting to your wireless signal for the first time.