Tripp Lite B110-SP-CAT-OD Owner's Manual page 9

Source and Equipment (Edge) Protection
The previous installation only protects your edge equipment
from surge, lightning or ESD damage. To protect both the
source and edge equipment, install two B110-SP-CAT-OD
units in your application. A B110-SP-POE can be installed
instead of a second B110-SP-CAT-OD to protect the source if
the second unit will be installed indoors.
Note: Use standard size Cat5e, Cat6 or Cat6a cables that feature a
wire gauge of 23/24 AWG. Slim category cables are not supported.
Maximum cable distance between two B110-SP-CAT-OD units is
328 ft. (100 m).
19-11-220-933B57-BOOK.indb 9 19-11-220-933B57-BOOK.indb 9
Installation
Wireless Access Point
PoE Switch
9
To LAN
2/5/2020 1:28:52 PM 2/5/2020 1:28:52 PM