Tripp Lite B110-SP-CAT-OD Owner's Manual page 6

2. Insert both the grounding wire and the bare-wire end of the
3. Using a crimping tool (such as Tripp Lite's T100-001-TST,
19-11-220-933B57-BOOK.indb 6 19-11-220-933B57-BOOK.indb 6
Installation
category cable in the enclosure, making sure it is inserted
on the side with the slit.
sold separately), crimp an RJ45 connector to the bare end
of the category cable.
Screw the metric cable gland to the enclosure using the
E
end nut previously removed in Step 1. Then tighten
the cap securely onto the metric cable gland.
6
2/5/2020 1:28:51 PM 2/5/2020 1:28:51 PM