Advertisement
Option programming
The OneRemote controller inside your device can be programmed with different options,
to fit different setup and needs.
An option programming is done by pressing a series of buttons in a special scheme that
does not occur during daily use. A programming must be ended within 3 seconds.
To abort an ongoing programming sequence, press any other button than
0
numeric buttons
In some cases it is not wanted that the device automatically powers off, when the TV is
powered off. Use this option to enable or disable this.
qqqqqq71
qqqqqq70
Some B&O TVs not only echoes the MENU button from the remote control to the device
attached to the Scart socket. It also opens the TV's own ON-screen menu. Use this option
to avoid that the device acts on this command, if your setup has this conflict.
qqqqqq81
qqqqqq80
9
to
.
Option 7x – auto power off enable.
Option 8x – menu button block enable.
Device powers off with TV.
Device never powers off.
Use the MENU button.
Ignore the Menu button..
q
or the
Advertisement
