Advertisement
INT internal controller -how it works
A OneRemote INT controller is a small microcomputer, which is specifically made to be
built in to a non Bang & Olufsen device, equipped with a Scart output socket. This could
be a Satellite receiver, DVD player etc.
A Bang & Olufsen TV receives IR data from its remote control, a Beolink1000, Beo4,
Beo5 or another.
When a Scart source is selected on the B&O TV, where a device with an INT controller is
connected, the TV echoes control data from the remote control to the device. These data is
retransmitted via this Scart connection to the device. Control data flows through the
existing Scart cable, therefore no further cables is needed.
With a OneRemote OneWay or TwoWay cable, the device can be placed up to 25 metres
away from the TV. It could be placed in another room, under a sofa or where ever it suits,
as operation is handled via the Scartcable.
If both the TV and the device are equipped with a HDMI connection, a HDMI cable can
be added to improve picture and sound quality.
The microcomputer then translates the B&O control data, to data that controls the specific
device that it is built into.
If the Bang & Olufsen TV that the device is connected to is the main TV of a Beolink
system, all link rooms can get to the device and even operate it.
Advertisement
