Weekly Timer Operation - Toshiba RAS-18J2KVSG-TR Owner's Manual

WEEKLY TIMER OPERATION

24
How to set WEEKLY TIMER
1. Press
2. Press
The sequence of day symbol appears on the LCD.
3. Press
• The program 1 is ready for setting while
pressed PG-1 appears on the LCD.
• Press
the sequence program 1 to program 4.
4. Press
• The time can be set between 0:00 and 23:50 in
10 minute intervals.
• Press and hold the button to change setting time
for 1 hr.
• Only one of ON or OFF timer can be set on each
program.
ON timer display
*OFF timer is used to stop the air conditioner only.
The display does not show Operation mode,
Temperature, Fan speed and others.
5. Press
6. Press
• The temperature can be set between 17°C and 30°C.
7. Press
8. Add operations, if required.
• Press
(Notes: Fireplace cannot select and memorize in
weekly function)
• Press
• Press
• Press
9. Adding or dditing the program.
The program can be set to perform on all the required
days until
If adding or editing a program is required, please
repeat steps 2 - 8 before setting confirmation.
10. After adding or editing, press
setting*.
1120650271-00_S01_182x257_16p_S_p70_190906_EN,TR.indd 7
to enter WEEKLY TIMER setting.
Blink
to select desired day in sequence.
SU MO TU WE TH FR SA
WEEKLY SUMO
TUWETHFRSA
(All day)
to select the program number.
is
to change the program number in
PG-1
PG- 2
PG- 3
PG- 4
or to select the desired time.
OFF timer display*
to select desired operation.
or to select desired temperature.
to select the desired fan speed.
to use 8°C operation.
to use ECO operation.
to use Hi-POWER operation.
to use Silent operation.
is pressed to confirm the setting 10.
to confirm the
Operating Mode
Weekly timer running
Next program
Timer ON or OFF
Next operation
time
*Point remote control at air conditioner receiving module
then, press SET button until you hear the "PiPi" sound.
This means the setting operation has been completed.
As the air conditioner is receiving the signal, you will hear
separate "Pi" sounds corresponding to the number of days
in the selected setting.
An incomplete setting is indicated if the TIMER lamp is
blinking. Press
Notes :
1. Place the remote control where the indoor unit can receive the signal.
This will increase the accuracy of the timing between the remote control
and the air conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER operation.
In this situation, the air conditioner will first follow the normal timer until it is
complete; then, it will return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such as MODE, TEMP,
FAN, Hi-POWER, ECO and etc., can be adjusted but when the clock
reaches the program setting, the operation will return to the set items in
the program.
4. When the remote control is sending a signal to the air conditioner, avoid
interference from objects that can block the signal.
Edit Weekly timer program
To edit the program after confirming the weekly timer
setting on Page 3, follow steps 1 - 3 below.
1. Press .
• The day of the week and the program number of the
current day will be displayed.
2. Press to select the day of the week and
press to select program number to be
confirmed.
• Resetting the operation.
3. Press to exit confirming mode.
Deactivating WEEKLY TIMER operation
Press while "WEEKLY" is desplayed on the LCD.
• The "WEEKLY" indicator will disappear from the LCD.
However, the program will remain in the remote control.
• The TIMER lamp goes off.
• To reactivate the WEEKLY TIMER operation again,
press again, LCD shows the next program.
The program, after reactivation, is related to the clock
time.
To delete programs
The individual program
1. Press .
• The day of the week and the program number is
displayed.
• Select the day to delete the program.
2. Press to select the program number to be
deleted.
3. Press .
• ON or OFF timer will be cleared and the LCD will blink.
4. Press to delete the program.
• Press while the LCD is blinking. The program
has now been deleted.
All programs
1. Press .
• The day of the week and the program number will
be displayed.
2. Press and hold for 3 seconds.
• All programs will be deleted and LCD displays
current operation.
Notes :
Make sure the remote control receiving module on the air
conditioner receives the signal from the remote control.
Display after
pressing SET
button
EN
Operating Temperature
and Fan speed
twice.
23/12/2562 13:26:26