Installa
S1012_GR-12L_DE_V1sh
The receiver must be protected against dust, exhaust gases, splash
water, etc. in the model. When you install your receiver, make sure
that it is not excessively
opera
Servo cables may not be wound around antennas or run next to
them. Make sure that the cables cannot
to ant
ht.
In the case of carbon
antennas shall be routed from the fuselage.
Connect the devices that have to be connected to the receiver to the
row of sockets on one end of the receiver. The servo c
the Graupner-HoTT receiver are numbered.
The polarity of the plug-in system cannot be reversed. Do not apply
force.
Note
For the
HoTT receiver, insert the connectors with the brown
or black cable upwards.
ht to prevent it from overhea
to lie directly adjacent
re fuselage, at least the last 35 mm of the
during
of
9 / 20