Wolf CWL-300 Installation Instructions Manual page 8

Chapter 4
Step Readout
Description
no. (example
No.1 2,200
No.2 C 0 Message code operating condition
No.3 bP.1 Bypass status
(only if mounted)
No.4 tP.9
No.5 tS.21
No.6 In.0 Not applicable
No.7 P1.6.2
for moisture sensor
No.8 P2.5.2
for carbon dioxode sensor (P2)
u
No.9 .186
No.10 .186
U
No.11 t.180
No.12 A.180
No.13 u0.0 Status frost protection
Temperature to atmosphere
No. 14 St.9
(sensor not connected as standard)
No.15 Pt.18
(sensor not connected as standard)
No.16 tn.25
8 Heat Recovery unit CWL-300(B) / CWL-400(B) with option PCB
Remark
3
/h]
C0 =
C3 =
C6 =
C8 =
C12=
2 = input at minimum
3
/h]
3 /h]
1 to 4 = imbalance
5 = input fan off
If not connected Pt.75
If not connected Pt.75
Settings
No message
Input fan running at constant pressure
Output fan running at constant pressure
Imbalance detected, if not permissible
(I7=0). No response to multiple switch
until "OK" has been pressed
Incident setting triggered