Linksys PLWK400 Setting Up A Wireless Network page 20

Step 3:
Check the other devices in the Powerline network. Make sure all adapters are configured
with the same network password. Otherwise, reconfigure them with the same password. .
Adding a device
If the device is not detected, you can manually add the Powerline device to the network using the
Add Device option. Powerline AV Ethernet adapters and Powerline Turbo Bridge adapters have
this option on the Main screen of their Powerline Utility.
To add a device:
Step 1:
Access the Powerline Utility by clicking Start > All Programs > Linksys > Powerline
Utility.
Step 2:
On the Main tab of the Powerline Utility, click the Add Device button if you want to add