GoPro HERO8 Black Manual page 60

Tech Specs: Video
HYPERSMOOTH 2.0 VIDEO STABILISATION
HyperSmooth 2.0 delivers ultra-smooth professional footage by
correcting for camera shake. It crops your videos while recording, which
lets it buffer the footage to eliminate bumps and jitters. This makes it
perfect for biking, skating, skiing, handheld shots and more. HERO8 Black
has four HyperSmooth settings:
Setting Description
Boost Maximum video stabilisation with tight cropping.
Stronger video stabilisation with minimal
High
cropping (Wide lens is cropped by 10%).
Stabilised video with minimal cropping (Wide
On
lens is cropped by 10%).
Off Records without video stabilisation or cropping.
Heads Up: HyperSmooth is unavailable when recording 4K60 video with
the Linear digital lens. It will use standard video stabilisation in its place.
PRO TIP: You can smooth out your footage even more by using Touch
Zoom to crop your shots before you start recording. This will give your
camera an even bigger buffer to use when stabilising your video.
118
Tech Specs: Video
AUTO LOW LIGHT
HERO8 Black can tell if there isn't enough light for your shot and
automatically lower the frame rate to improve video quality. This is
especially helpful when you're moving in and out of low-light conditions.
Auto Low Light is set to On by default. It works with all resolutions when
capturing at 50 or 60 fps.
Turning Off Auto Low Light
1. From the Video screen, tap the settings.
2. Tap Low Light.
LOOPING INTERVAL
You can set your GoPro to record 5- (default), 20-, 60- or 120-minute
loops. It can also be set to Max, which will record until your SD card is full
before looping back to record over the start of the video.
119