3-Way Conference Call With Two Lines; 4-Way Conference Call (Line 1 + Line 2 + 2 Extensions); Intercom Calls; Making An Intercom Call - Motorola ML25255 Full User Manual

From the cordless handset:
1. While on a call, press Int./Hold and wait for the timer to clear from the screen.
2. Press Int./Hold again.
3. Using VOL + and VOL - of the navigation button to scroll to the desired handset or base and
press SELECT softkey.
4. The selected handset or base will emit a page tone. The user on the selected handset or base
can press t, s, HEADSET, or pick up the corded handset to answer the intercom / paging call.
5. The originating caller can then press
the external caller and the intercom call.

9.20.3 3-way conference call with two lines

From the base:
While on a call on Line 1, press HOLD to put the call on hold.
1.
2. Press LINE 2 to get a dial tone. Dial the phone number, and then talk to the other person.
3. The originating caller can then press
the two lines.
From the cordless handset:
While on a call on Line 1, press Int./Hold to put the call on hold.
1.
2. Press LINE 2 softkey to get a dial tone. Dial the phone number, and then talk to the other
person.
3. The originating caller can then press
the two lines.

9.20.4 4-way conference call (Line 1 + Line 2 + 2 extensions)

1. While on a call with both Line 1 and 2 on hold, press INTERCOM (on base) or Int./Hold (on
cordless handset) and select the desired handset or base to intercom.
2. The selected handset or base will emit a page tone. The user on the selected handset or base
can press t or s to answer the intercom / paging call.
3. The originating caller can then press
4. Since Line 1 and 2 are both on hold, the user will be prompted to select Line 1, Line 2 or Both to
conference with.
If BOTH softkey is selected a 4-way conference is established between the originating caller,
both lines and the intercom call.
10

Intercom Calls

10.1

Making an Intercom Call

1. In idle mode, press any One-Touch Memory (1 -10) button for the extension you want to
intercom. One-Touch Memory (1) button represents handset 01, (2) represents handset 02, etc.
The intercom / page tone will be emitted.
Or, press INTERCOM (on base), Int./Hold (on cordless handset) to bring up the list of all
registered handsets and base (except itself). Then using VOL+ and VOL- of the navigation
button to scroll to the desired handset or base and press
2. To cancel the intercom call, press
NOTE
If the receiving handset or base does not answer within 30 seconds, the intercom call is cancelled.
You will hear an error tone and the screen displays UNAVAILABLE.
10.2

Answering an Intercom Call

When you receive an intercom call, the screen will display the Phone ID of the calling handset.
The call can be answered on the cordless handset by pressing t or s. It can also be answered on
the base unit by lifting the corded handset, pressing s or HEADSET. The headset must be already
connected.
If you do not want to answer the intercom call, press
30
CONF
softkey to establish a 3-way conference between
CONF softkey to establish a 3-way conference between
CONF
softkey to establish a 3-way conference between
CONF softkey to establish a conference.
STOP softkey.
REJECT
SELECT
softkey.
softkey.