x Changing the "Video" setting
The "Video" menu allows you to adjust the picture settings.
1
Press MENU.
2
Make sure the "Video" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "Mode"), then press
Select
"Mode"
"Color Temp."
(Color Temperature)
"VM"
(Velocity Modulation)
"3D Intelligent Picture"
Note
• "3D Intelligent Picture" is available only for NTSC 3.58 color system through 8 antenna and
VIDEO input terminals. For NTSC 3.58 color system, "3D Comb Filter : On" or
"3D–NR : On" display will appear.
16
Menu Adjustment
) is
.
To
choose either "Vivid", "Standard", "Movie" or "Sports" (see
page 11).
Tip
• You can adjust the setting to your personal preference in the
"Picture Controls" option (see page 17).
adjust white color tint.
Choose either "Cool" (blue tint), "Neutral" (neutral tint) or
"Warm" (red tint).
sharpen the edges of each object.
Choose either "High", "Low" or "Off".
optimize picture quality.
Automatically, the picture will become clearer and sharper if the
signal is good and noise will be reduced if the signal is noisy.
Press V or v to select "On", then press
To cancel, select "Off", then press
Video
Mode:
Vivid
Picture Controls
Color Temp.:
Cool
VM:
High
3D Intelligent Picture:
On
Move
Select
.
.
.
End