Bowflex SelectTech 2080 Assembly Manual page 9

Step 6.
Note: Fully tighten the hardware.
Item Qty Description
7 1 Media Rack
Step 7.
Final Inspection
Inspect your equipment to ensure that all fasteners are tight and components are properly assembled.
Be sure to record the serial number in the field provided at the front of this manual.
Put the Weight Plates on the Base. Put the Barbell and Curl Bar on the Base and the bar hanger brackets on the Stand.
Do not use until the equipment has been fully assembled and inspected for correct performance in accordance with the Owner's Manual for your SelectTech
Barbell with Curl Bar. Fully tighten the hardware before you put the barbell/curl bar into the installed barbell base on the stand.
7
9
Assembly / Owner's Manual
3mm
X2
D
E
™