Communications Interfaces; Communications; Snmpwebcard Slot; Input Dry Contact Interface - Tripp Lite SmartOnline SU80K Owner's Manual

10 – Communications
Note: The communications connections described in this section are optional. The UPS system will function properly without these connections.

10-1 Communications Interfaces

10-2 SNMPWEBCARD Slot

Remove the cover panel to install a Tripp Lite SNMPWEBCARD accessory. The SNMPWEBCARD accessory provides an Ethernet interface for
the UPS system and enables remote monitoring and control via SNMP, Web browser or telnet. Call (773) 869-1234 for more information about
ordering the SNMPWEBCARD accessory.

10-3 Input Dry Contact Interface

The input dry contact interface receives contact-closure signals that allow the UPS system to receive commands and monitor external battery
conditions:
P1—Remote Emergency Power Off (EPO)
P2—Auxiliary Dry Contact Inputs (2 sets)
P3—External Battery Cabinet Temperature 1
P4—External Battery Cabinet Temperature 2
P5—External Battery Cabinet Temperature 3
P6—External Battery Cabinet Temperature 4
P7—External Battery Status
200803004 93-2793 SU80k manual 4C.indd E41 200803004 93-2793 SU80k manual 4C.indd E41
Parallel
Output Dry
Redundancy Port
Contact Interface
SNMPWEBCARD Slot
RS-232
Serial Port
41
1
2
3
4
5
Input Dry Contact
Interface
6
7
8
9
10
11
12
13
6/16/2008 1:44:00 PM 6/16/2008 1:44:00 PM