Table of Contents
Advertisement
IntelliFire™ Plus ODS
Installation of Remote Control Housing
CAUTION! Risk of Fire! DO NOT install damaged or
modified components. Warranty will be voided if dam-
aged or modified components are installed.
Kit components: One remote control, two #6 screws, two
wall anchors, 3 AAA batteries and one AUX300 module. If
batteries are properly installed the remote will turn on
1. Remove remote control components from packaging.
2. Remove battery cover from the back of the remote by
sliding it down and install 3 AAA batteries.
To prevent unintended operation when not using your fire-
place for an extended period of time (summer months,
vacation, trips, etc):
• Remove batteries from remote control.
• Unplug switching adapter and remove back-up batteries.
3. Secure the remote control housing on a flat wall sur-
face using the two screws and wall anchors provided.
See Figure 2.
Figure 2. Mounting Remote Control Housing
Monessen • AVFL42 Installation Instructions • 4117-900 Rev. B • 05/20
4. Place remote control inside housing. See Figure 3.
Figure 3. Remote in Housing
5. Close the housing door. See Figure 4.
Figure 4. Mounting Remote Control
AVFL Vent Free Fireplace
Housingng
25
Hide quick links:
Advertisement
Table of Contents
