2.4 These instructions cover only the Elta Fans Ltd product and do not include the supply or installation of any safety equipment that may be required e.g. adequate guarding or protection from rotating parts and proper electrical isolation.
4.5 Place the outer clamp plate (D) and the rear grille in the hole made in the glass or partition from the rear and fix it in place using the tabs (E) to hold in place. (FIG 5) 4.6 Place the inner clamp plate (C) on the inside of the glass and screw it to the outer clamp plate (D) using four 60 mm bolts supplied (F).
Page 5
The Telescopic Kit comprises: - Interior Metal Sleeve Exterior Metal Sleeve 2 Trim Surrounds Fasteners (V1) 8 x M5x30 Bolts (V2) 8 x M4 14 Bolts (V3) 4 x M3 x 16 Bolts...
GUARANTEE Elta Fans Ltd will, free of charge, within a period of 2 years from the date of despatch from their works, repair or at its option replace any goods which are proved to have defects as a result of defective materials or workmanship.