Wiring The Fan - Hunter Cranbrook Installation Manual

1886
We know wiring is hard. Let's make it easier.
Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch
setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualified electrician.
You are going to need these:
4 Wire Nuts (these are in the
1
Connect the 2 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling and ceiling plate.
2
5
Ceiling Bracket

Wiring the Fan

bag)
Hanging Fan Wiring
Hunter Pro Tip:
Here is how to connect the wires:
Push the bare metal ends of the wires together and slide a wire
nut over them. Then, twist the wire nut clockwise until tight.
Give it a gentle pull to make sure none of the wires are loose.
White
Black
Connect the black wire
(ungrounded) from the
ceiling to the black
wire from the receiver.
Connect the blue wire
from the receiver to the
blue wire (or possibly
black with white stripe
wire) from the fan.
Black
Canopy Blades
Connect the white wire
(grounded) from the ceiling
to both the white wire from
the receiver and the white
wire from the fan.
White
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualified electrician.
Connect the yellow wire
from the receiver to the
black wire from the fan.
Light Bulbs Remote