Table of Contents
Advertisement
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for the
environment.
Charge D
WALT battery packs only with designated
e
D
WALT chargers. Charging battery packs other
e
than the designated D
D
WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCF622 operates on an 18 volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB546. Refer to
Technical Data for more information.
Package Contents
The package contains:
1 Cordless self-drilling screwdriver
1 Li-Ion battery pack (C1, D1, M1, P1, S1 models)
2 Li-Ion battery packs (C2, D2, M2, P2, S2 models)
3 Li-Ion battery packs (C3, D3, M3, P3, S3 models)
1 Instruction manual
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
WALT batteries with a
e
Wear ear protection.
Wear eye protection.
Visible radiation. Do not stare into light.
Date Code Position (Fig. A)
The date code
, which also includes the year of manufacture,
13
is printed into the foot of the tool housing.
Example:
2016 XX XX
Year of Manufacture
Description (Fig. A, C)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
6.35 mm hex quick-change chuck
1
Quick-change sleeve
2
Adjustment collar
3
MAX/MIN adjustment range
4
Clutch collar
5
Forward/reverse control lever
6
Variable speed trigger switch
7
Lock-on button
8
LED worklight
9
Battery release button
10
Battery pack
11
Belt hook
12
Date code
13
Fuel gauge
14
Intended Use
Your self-drilling screwdriver has been designed for driving
self-drilling fasteners in metal-to-metal roofing or sheeting
applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This self-drilling screwdriver is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
English
9
Advertisement
Table of Contents
