Griddle Plate - Fisher & Paykel DCS GDE1 Installation Manual

Excessive weight Hazard
Two or more persons are required to handle the griddle plate.
Ensure the griddle plate is removed before moving the product to the installation location.
Removing the griddle plate
1
front of griddle rear of griddle
2
3

GRIDDLE PLATE

Remove the vent assembly
by pulling up gently from the
product, and set aside on a
protected surface.
Grip the griddle plate from under
the brackets at the front and rear
of the product as shown.
Lift up the griddle assembly and
set aside on a protected surface.
Replacing the griddle plate
1
2
Grip the front and rear of the
plate. Lower the plate to slot
back in place onto the product
ensuring it is centered.
Replace the vent assembly by
slotting the flash tubes back
gently into the support brackets
and lowering.
7