Installing The Software - Vox JamVOX Installation & Setup Manual

Installing the software

Caution
The software license agreement for this product is stored in the installer. You must read this
license agreement before you install the software. Your installation of the software will be
taken as your acceptance of this agreement.
Do not connect the JamVOX Monitor to your computer before
installing the JamVOX Driver and Software.
Windows
1
Double‐click the JamVOX software installer and proceed as directed by the on‐screen
instructions to install the JamVOX software.
2
Double‐click the JamVOX driver installer and proceed as directed by the on‐screen
instructions to install the JamVOX driver.
3
Connect the JamVOX Monitor to a computer with a USB cable. The JamVOX driver is
automatically installed.
4
With the JamVOX Monitor connected, start the JamVOX software. Authentication is per‐
formed automatically by the JamVOX Monitor. Once authentication has been performed,
you can use the JamVOX plugin and audio interfaces other than the JamVOX Monitor.
NOTE It may be necessary to perform authentication again with the JamVOX Monitor
under various conditions such as when using a new computer or when your
operating system has been reinstalled.
Mac
1
Double‐click the JamVOX software installer and proceed as directed by the on‐screen
instructions to install the JamVOX software.
2
Double‐click the JamVOX driver installer and proceed as directed by the on‐screen
instructions to install the JamVOX driver.
3
With the JamVOX Monitor connected, start the JamVOX software. Authentication is per‐
formed automatically by the JamVOX Monitor. Once authentication has been performed,
you can use the JamVOX plugin and audio interfaces other than the JamVOX Monitor.
NOTE It may be necessary to perform authentication again with the JamVOX Monitor
under various conditions such as when using a new computer or when your
operating system has been reinstalled.
En-4