Note: This graphic represents actual-sized center-to-center spacing for drilling holes to mount the unit. This portion can be printed and cut out to use as a template for mounting purposes.
In your PDF print setup menu, be sure to turn the Page Scaling feature OFF or set to NONE, to insure proper measurments.
4.000
[101.60]
Refer to the full product drawing for measurements of the entire unit in relation to the cut out holes and determine where to place your
template for proper mounting.
Dimensions: [mm] INCHES
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Mounting Template for Tripp Lite UPS System Models: