Panasonic Lumix DMC-F3P Service Manual page 15

Step 5. Default settings (Test):
1. Click on the pull down menu tag of the "Test".
(The Test item list is displayed.)
2. Choose the "Set Default" in order to refresh the unit (Factory shipping condition).
Step 6. CONFIRMATION:
1. Close the "DscCalDi.exe" by clicking on the "X" located on the top right corner.
2. Turn on the camera switch.
3. Disconnect the USB cable and turn "OFF" the power switch of the camera unit.
4. Confirm that the language and Clock set request screen is displayed on the LCD monitor.
Major default setting condition is as shown in the following table.
15