Advertisement
Quick Links
Honeywell
12 Clintonville Road
Northford, CT 06472
http://www.honeywellpower.com
1 Overview
These Honeywell Rack Mount CCTV power supplies will provide 12 VDC power distributed via 16 circuits for powering
CCTV cameras and other video equipment. Each circuit will be fuse protected at 3.0A, or PTC protected at 2.5A. Fuses
are accessible directly through the front panel by removing six screws.
2 Specifications
•
Input:
– HPR12DC416UL & HPR13DC416CBUL - 117V, 60Hz, 1A.
– HPR12DC616UL & HPR12DC616CBUL - 117V, 60Hz, 2A.
– HPR12DC616CE & HPR12DC616CBCE - 230V, 50/60Hz, 1A.
•
Output:
– HPR12DC416UL & HPR12DC416CBUL - 4A @ 12VDC.
– HPR12DC616UL & HPR12DC616CBUL - 6A @ 12VDC.
– HPR12DC616CE & HPR12DC616CBCE - 6A @ 12VDC.
•
16 outputs.
•
Maximum current rating:
– HPR12DC416UL: any output, 3A; total supply, 4A @ 12VDC.
– HPR12DC416CBUL: any output, 2.5A; total supply, 4A @ 12VDC.
– HPR12DC616UL: any output, 3A; total supply, 6A @ 12VDC (8A for operations below 100°F, 38°C)*.
– HPR12DC616CBUL: any output, 2.5A; total supply, 6A @ 12VDC (8A for operations below 100°F, 38°C)*.
– HPR12DC616CE: any output, 3A; total supply, 6A @ 12VDC (8A for operations below 100°F, 38°C)*.
– HPR12DC616CBCE: any output, 2.5A; total supply, 6A @ 12VDC (8A for operations below 100°F, 38°C)*.
* Outputs 1 to 8 provide 3A @ 12VDC (4A operation below 100°F, 38°C) and outputs 9 to 16 provide 3A @
12VDC (4A operation below 100°F, 38°C).
•
16 power limited outputs.
•
Surge and transient protection.
•
Transformer has built-in thermal protection.
•
Indicator Lights:
– Input Power Indicator (1 red): Illuminated power switch/circuit breaker.
– Output Power LEDs (16 green): ON indicates that DC is present at the related output circuit.
•
Overload Protection:
– Input power switch has built-in circuit breaker.
– AC line fuse (5 x 20mm glass).
– Individual output circuits have a glass fuse (5 x 20mm) or resettable PTCs.
– NOTE: To reset a PTC that has experienced an overload or short circuit, switch power off for 5 minutes to allow
the PTC to reset itself.
•
Factory installed three-conductor AC line cord with North American NEMA 5-15 plug (117V supplies) or European
Schuko Type, CEE 7/7 plug (230V supplies).
•
2U rack chassis for use in standard EIA 19" rack.
• HPR12DC416UL • HPR12DC416CBUL • HPR12DC616UL
• HPR12DC616CBUL • HPR12DC616CE • HPR12DC616CBCE
CCTV Rack Mount Power Supply and Distribution Units
PN 52995:A
5/31/06
ECN 07-004
Product Installation Document
Continued on next page...
Advertisement
Related Manuals for Honeywell HPR12DC416UL
Summary of Contents for Honeywell HPR12DC416UL
- Page 1 1 Overview These Honeywell Rack Mount CCTV power supplies will provide 12 VDC power distributed via 16 circuits for powering CCTV cameras and other video equipment. Each circuit will be fuse protected at 3.0A, or PTC protected at 2.5A. Fuses are accessible directly through the front panel by removing six screws.
-
Page 2: Installation Instructions
– Plug power cord into receptacle. – Set power switch on back of unit to the ON (RESET) position. If the green LEDs do not illuminate after the power switch is set to ON: Continued on next page... HPR12DC416UL(CB), HPR12DC616UL(CB) Installation Document P/N 52995:A 5/31/06... - Page 3 – Set power switch on back of the unit to its OFF position and unplug power cord from receptacle. – Replace blown fuse on HPR12DC416UL, HPR12DC616UL or HPR12DC416CE as follows: •Remove the six screws holding the front panel and remove the front panel.
- Page 4 Figure 1 - Power Supply with Front Panel Removed 52995bd1.wmf Continued on next page... HPR12DC416UL(CB), HPR12DC616UL(CB) Installation Document P/N 52995:A 5/31/06...
- Page 5 VERIFY OUTPUT VOLTAGE BEFORE CONNECTING DEVICES Circuit #1 + Field Wiring Terminals Common - Power ON/OFF Switch Circuit Breaker Circuit #2 + Common - Circuit #3 + hprcutawaydc.wmf Common - Continued on next page... HPR12DC416UL(CB), HPR12DC616UL(CB) Installation Document P/N 52995:A 5/31/06...
- Page 6 Figure 3 - Dimensions hprdimensions.wmf For additional information: • Visit our website at http://www.honeywellpower.com • Contact Technical Support at 1(877) HPP-POWR • E-mail us at hpp_techserv@honeywell.com HPR12DC416UL(CB), HPR12DC616UL(CB) Installation Document P/N 52995:A 5/31/06...