Page 1
INSTALLATION MANUAL EK-501 Local Interface Kit for Product Code 4036 NOTES • Before installing, be sure to unplug the power cord of the machine. • Keep all packing materials out of the reach of children. 4036-7773-02 Printed in Japan...
Page 2
EK-501 I Unpacking the Local Interface Kit I Installing the Local Interface Kit Check that the following accessories are available in the box. 1. Turn off the machine and unplug the power 1 Local Interface Board ................1 cord from the machine.
Page 3
EK-501 6. Remove the ornamental cover from control 10. Connect the local interface board connector board cover (one screw). to the PJ10 of the control board assy. 11. Secure the local interface board in position using three screws which has been removed in step 8.