Advertisement
Quick Links
Advertisement
Related Manuals for Sonance SB46-55
Summary of Contents for Sonance SB46-55
- Page 1 SONANCE SOUNDBARS I N ST R U C T I O N M A N UA L...
- Page 2 I. (8) M8 washers televisions. Your Soundbar is intended to match the following size television displays: SB46-55 for displays 55” diagonal; SB46-65 for J. (4) Rubber feet displays 65” diagonal; SB46-75 for displays 75” diagonal; SB46-85 for displays 85”...
- Page 3 NOTE: CONSULT LOCAL BUILDING CODES BEFORE RUNNING SPEAKER AND ELECTRICAL WIRES THROUGH WALLS. Placement and Options Overview Sonance Soundbars are designed to attach directly to most flat panel display wall mounts using VESA mounting points with the included attachment rails, connectors, and hardware.
- Page 4 Option 2 - Recessed Soundbar Connector The recessed Soundbar connector will align with displays from 1 7/32” (31.74mm) to 2 3/32” (53mm) deep displays. Various depths can be accomplished by using C. or D. screws accompanied by I. washers and G. nuts. Use the A. screws to attached the connector to the display attachment rails.
- Page 5 Assembling and Connecting the Position the soundbar as close to display as possible. Firmly fasten B. screws with I. washers to connect soundbar to the soundbar Attachment Rails connectors. Carefully place the display face down on a soft flat surface. This will require two people.
- Page 6 2. Bend the speaker wires into an L. for easy connections to the spring terminals. 3. The Sonance Soundbar’s six terminals are spring-loaded. Push the top of each terminal down to open the connector and insert the exposed wires into the holes in the spring terminals.
- Page 7 Option 4 - Cabinet or Table Top Installation SB46 M VESA Standard Attachment Points Sonance Soundbars can be mounted in a cabinet or placed on a table top using the included four rubber feet. Remove the adhesive backing and place the rubber feet on the outer corners on the 600mm bottom of the soundbar.
- Page 8 100Hz. We recommend the Height: 5 9/32” (134mm) Height: 5 9/32” (134mm) Sonance VPSUB with a Sonance DSP 2-150 MKII amplifier or a Depth: 2 9/16” (65mm) Depth: 2 9/16” (65mm) Sonance Impact cabinet subwoofer. The Sonance VP46R SST/ Width: 48 5/16”...
- Page 9 Sonance Dealer/Distributor, will be free from defective workmanship and materials for five (5) years, except for the grille, which is warranted for one (1) year. Sonance will at its option and expense either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.