Brake/Tail Light Bulb - Honda Dream Neo Owner's Manual

BRAKE/TAIL LIGHT BULB

1. Remove the screws (1).
2. Remove the taillight lens (2) by pulling
it down and pull out from the rear cowl.
3. Slightly press the bulb (3) and turn it
counterclockwise.
4. Install a new bulb in the reverse order
of removal.
5. Push the taillight lens upwards on
installing it back into place to lock the
tab (4) into the groove (5) of the rear
cowl as shown in illustration
Removal:
(2)
(1)
Honda Motorcycle & Scooter India Pvt. Ltd.
.
Pull down tail
light lens
Pull out tail
light lens
Installation:
(4)
(3)
(2)
(1)
(1) Screws ¼LØw l ½
(2) Taillight lens ¼Vs y ykbV ys a l ½
¼cYc½
(3) Bulb
¼VS C l½
(4) Tabs
(5) Rear cowl groove
(5)
Push
upwards to
lock into
groove
Place tail
light lens in
rear cowl
¼fj;j dkmy xz w o ½
73