Advertisement
Power Supply Replacement Instructions
This document helps you to complete the following tasks:
v Identify a failed power supply
v Remove the failed power supply and replace it with a new power supply
v Verify that the replacement power supply is working correctly
Best practice: Replace a failed power supply as soon as possible.
Important: Before you proceed with these instructions, review the IBM Systems Safety Notices provided in
the IBM Media Terms and Conditions CD that is included with your appliance model.
Note: The illustrations in this document might differ slightly from your appliance model.
Supported appliances
®
®
The instructions in this document support IBM
QRadar
Network Security XGS 5200 (IBM Part Number:
00VM976).
CAUTION:
The power control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all current from the device, ensure that all power cords are disconnected from the power
source.
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
1
© Copyright IBM Corp. 2017, 2017
Advertisement
