When No Mobile Workstation Is Used - Olympus OEP-4 Instructions Manual

2.9 When no Mobile
Workstation is Used
1
Confirm that the color video printer (OEP-4) is
turned OFF.
2
Connect the power cord of the color video printer
(OEP-4) to its AC mains power outlet first, then to
a wall mains socket outlet.
3
The following ancillary equipment can be
connected directly to wall mains socket outlets (see
Figure 2.8).
EVIS EXERA video system
center
EVIS video system center
VISERA video system center
Video system
3CCD camera control unit
Camera control unit
EVIS EXERA xenon light
source
EVIS universal light source
Xenon light source
EUS EXERA endoscopic
ultrasound center
EUS EXERA compact
endoscopic ultrasound center
High definition LCD monitor
LCD Monitor
High definition monitor
Color video monitor
Color video printer
4
The following ancillary equipment should be
connected through an isolation transformer (see
Figure 2.8).
Monitor
CV-160
CV-240, CV-140
OTV-S7V
OTV-SI
OTV-SP1C,
OTV-SP1C-G
OTV-SX2C
CLV-160
CLV-U40
CLV-S40, CLV-S30
EU-M60
EU-C60
OEV191H
OEV191
OEV181H
OEV143, OEV203
OEP-4
Monitor except OEV

2.9 When no Mobile Workstation is Used

2
23