Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NatComm EASY-TRANSFER
Summary of Contents for NatComm EASY-TRANSFER
- Page 1 EASY-TRANSFER USER GUIDE For Technical Assistance Please Phone: (07) 5596 5128...
-
Page 2: Packing List
PACKING LIST Before commencing installation, please check that you have the following items: Description Quantity EASY-TRANSFER Line Sharer Power Supply Telephone Cable with Female Socket Telephone Cable with Male Socket Page 2 National Communications... - Page 3 You can make an intercom call, from one of the telephone extensions to the other at any time, by simply dialing *. EASY-TRANSFER will then ring the other telephone extension and once the other party answers, you will be able to communicate just as if you had made a telephone call.
-
Page 4: Installation
INSTALLATION Page 4 National Communications... - Page 5 (or floor), then you will need to connect it with a telephone extension of an appropriate length (not supplied), or you will need to have it connected to EASY-TRANSFER by a technician, who will either use existing wiring within your walls or install new wiring within your walls, to provide connection to EASY-TRANSFER.
-
Page 6: Operation
OPERATION Once your EASY-TRANSFER device has been installed as per our instructions, you will be able to transfer an incoming or outgoing call from any telephone connected to your line (including those telephones not connected direct to an EASY-TRANSFER), to either telephone connected to the EASY-TRANSFER. -
Page 7: User Options
TELEPHONES TO RING It is possible to set ONE telephone connected to EASY-TRANSFER to NOT RING whenever there is an internal call. The telephone connected to port EXT A can be set to NOT RING by using the Dip Switches located on the underside of the unit (see page 10 for further details). -
Page 8: Dip Switch Options
C) SET TELEPHONES TO WORK IN PARTY OR PRIVATE MODE. PARTY MODE All telephones connected to EASY-TRANSFER can participate in a telephone conversation at the same time in the same manner as has been experienced before the fitting of your EASY-TRANSFER. -
Page 9: Dip Switch Settings
DIP SWITCH SETTINGS SWITCH 1 - If set to ON, the telephones connected to this unit will operate in PARTY mode. - If set to OFF, the telephones connected to this unit will operate in PRIVATE mode. SWITCH 2 - If set to ON, both telephones attached to this unit will RING with an incoming telephone call. - Page 10 EXAMPLES 1. To set a telephone to respond to TRANSFER CODE 3 Set dip switches 3=ON, 4=OFF This telephone must be connected to port A. 2. To set a telephone to respond to TRANSFER CODE 4 Set dip switches 3=ON, 4=OFF This telephone must be connected to port B.
- Page 11 NOTES National Communications Page 11...
-
Page 12: Specifications
SPECIFICATIONS Dimensions (all in mm) 106 (W) x 106 (D) x 43 (H) Weight 225g Power Supply 12VAC/500mA Power Consumption Idle - 0.5 Watts Power Consumption Call - 0.75 Watts Telephone Line In Connector : RJ 11 6 pin (2 centre) Extension A Out Connector RJ 11 6 pin (2 centre) Extension B Out Connector :...