Sony DVO-1000MD Manual page 10

Important EMC notices for use in
the medical environments
• The DVO-1000MD needs special precautions
regarding EMC and needs to be installed and put into
service according to the EMC information provided in
this instructions for use.
• The portable and mobile RF communications
equipment such as cellular phones can affect the
DVO-1000MD.
The DVO-1000MD is intended for use in the electromagnetic environment specified below.
The customer or the user of the DVO-1000MD should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Warning
If the DVO-1000MD should be used adjacent to or
stacked with other equipment, it should be observed to
verify normal operation in the configuration in which it
will be used.
10
Guidance and manufacturer's declaration-electromagnetic emissions
Compliance
Group 1
Class B
Class A
Complies
Warning
The use of accessories and cables other than those
specified, with the exception of replacement parts sold
by Sony Corporation, may result in increased emissions
or decreased immunity of the DVO-1000MD.
Electromagnetic environment-guidance
The DVO-1000MD uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
The DVO-1000MD is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.