Adjust Height-Adjustment Cable - Ariens Sno-Thro Compact Series Operator's Manual

2. Adjust tension as needed with track
adjusters. Tighten nut to increase tension;
loosen nut to decrease tension. See
Figure 40.
Figure 40
If unit does not travel correctly, adjust track
tension. See Figure 40.
• If unit pulls to the left, tighten the left track
adjuster.
• If unit pulls to the right, tighten the right
track adjuster.
Adjust here.
ADJUST HEIGHT-ADJUSTMENT
CABLE
Model 920318
See Figure 41.
NOTICE: Make sure height adjuster lock
finger is fully engaged before making
adjustments.
1. Loosen jam nuts on cable adjustment
barrel.
2. Tighten right jam nut to remove slack
between adjustment barrel and cable
eyelet.
3. Tighten left jam nut.
1. Lock Finger
2. Right Jam Nut
3. Left Jam Nut
4. Adjustment Barrel
5. Cable Eyelet
6. Cable Slack
EN - 23
6
5
2
4
3
Figure 41
1