Bajaj AVENGER 220 CRUISE Owner's Manual page 14

Control Switches - RH
E. Starter Button : It operates the electric
starter. It is recommended to start the
engine with the transmission in neutral.
Vehicle in Gear - Press clutch lever &
operate starter button to start the engine.
F. Engine Kill Switch : It is used for
switching ON (
F. Light Switch : It has 2 positions. When
igntion switch is 'ON', lighting system will
work as per given table.
: Tail lamp will get 'ON'. DRL 'ON' .
(High Intensity)
: Head lamp, Tail lamp, Number Plate
lamp & Speedometer illumination will
get 'ON'. DRL remains 'ON' (Low
intensity)
F
G
E
) & OFF ( ) engine.
Day Time Running Light Feature:
• Day Time Running light is provided inside
headlamp.
• Day Time running light gets 'ON' (High intensity)
when ignition switch turned to 'ON' position.
• After headlight is turned to 'ON' position, intensity
of DRL LED's will get reduced.
Cruise
Igntion Switch Light Switch
ON OFF
ON ON
Note: The inside of the lamp lens might fog up after
using the motorcycle in rain or after washing. Fog inside
the lamp lens will disappear gradually by switching on
the lamp while driving the motorcycle. The amount of
time it takes for the fog to disperse depends on the
humidity of the ambient air. Fog in non functional areas
other than reflector does not affect the lamp
performance.
10
Street
DRL Head Light
ON High Intensity
OFF
ON
ON Low Intensity