Setting Up The Monitor; Connecting The Stand - Dell D2421H User Manual

Setting Up the Monitor

Connecting the stand

NOTE: The stand is not installed at the factory when shipped. (D2421H/D2721H)
NOTE: The stand is installed at the factory when shipped. (D2421DS)
NOTE: The graphics are used for the purpose of illustration only. Appearance on
the computer may vary.
NOTE: The following instructions are applicable only for attaching the stand that
was shipped with your monitor. If you are attaching a stand that you purchased
from any other source, follow the set up instructions that were included with the
stand.
To attach the monitor stand:
D2421H
1. Assemble the stand riser to stand base.
a. Place the monitor stand base on a stable table top.
b. Slide the monitor stand body in the downward direction into the stand base
until it clicks into place.
2. Attach the stand assembly to the monitor:
a. Place the monitor on a soft cloth or cushion near the edge of desk.
b. Align the stand assembly bracket to the monitor groove.
c. Insert the bracket towards monitor until it locks in place.
24 │ Setting Up the Monitor