Safety Advice; Gas Connections - Tricity Bendix SG 205WL Operating And Installation Instructions

Gas connections

•
Before installation ensure gas type and
pressure and the pre-setting of the appliance
are consistent.
•
This appliance must be installed only in a
room with good ventilation.
•
This appliance must not connect to a flu. It
has to be installed and connected in
accordance with the rules in force. Special
attention should be paid to ventilation
requirements.
•
The adjacent furniture panels have to be heat
resistant or protected by such material.
•
The gas type for this appliance is stated on
the rating plate.
Connection to gas supply.
Check that the gas flow and the diameter of the
supply pipe are sufficient to supply all the
appliances of the installation.
•
Check that all connections are tight.
•
Install an accessible and visible gas tap to
isolate the appliance.
- Installation of flues and ventilation for gas
appliances of rated input not exceeding
st nd
60 kW (1 , 2 and 3
2 Specification
ventilation for gas appliances – BS 5440
Current editions;
Gas burning appliances – Part 3 Domestic
-
cooking appliances burning gas – BS
5386 Current editions;
Specification for
-
pressure gas pipe work of up to 20mm
(R1) in domestic premises (2
– BS 6891 Current editions;
Pipe threads for tubes and fittings where
-
pressure-tight joints are made on the
threads (metric dimensions) – BS 21
Current editions;
Flexible hoses, end fittings and sockets
-
for gas burning appliances – BS 669
Current editions;
- Installation of domestic gas cooking
st nd
appliances (1 , 2
BS 6172: 1990 Current editions;
- For appliances installed in the Republic of
Ireland please refer to NSAI-Domestic Gas
Installation IS813 Current editions.
ADVICE FOR SAFETY
rd
family gases) – Part
for installation of
installation of low
nd
family gas)
rd
and 3 family gases) –
19