Installing The Battery - KTM 250 SX-F Setup Instructions

3 WORK
3.9

Installing the battery

–
Press the spring with special tool
Pliers for footrest spring (79029083000)
The special tool is applied to area
–
Mount pin
S00976-10
–
Mount the washer and split pin
S00975-10
Main work
(All SX‑F models)
–
Insert the battery into the battery compartment with the terminals facing for-
ward and secure with the holding bracket
Battery (C22S)
–
Mount and tighten screw
Guideline
Remaining nuts, chassis
–
Connect positive cable
Guideline
Screw, battery terminal
Contact disks
with the claws toward the battery terminal.
–
Slide positive terminal cover
H00386-10
(XC‑F US)
–
Insert the battery into the battery compartment with the terminals facing for-
ward and secure with the holding bracket
Battery (HJTZ5S-FP)
–
Mount and tighten screw
Guideline
Remaining nuts, chassis
–
Connect positive cable
Guideline
Screw, battery terminal
Contact disks
with the claws toward the battery terminal.
–
Slide positive terminal cover
H00386-10

.

.

.

.

and negative cable

must be mounted under screws
 over the positive terminal.

.

and negative cable

must be mounted under screws

over the positive terminal.

on the footrest.

.
M6 10 Nm
(7.4 lbf ft)

with the battery.
M5 2.5 Nm
(1.84 lbf ft)

and cable sockets

.
M6 10 Nm
(7.4 lbf ft)

with the battery.
M5 2.5 Nm
(1.84 lbf ft)

and cable sockets
9

