Table of Contents
Advertisement
The Control Panel
1 Programme Chart
This will help you to select the correct time for
drying.
2 Mains on Light
This lights up when the machine starts operating and
goes out when the selector dial is on position "0" and
when you open the door of the appliance or the small
door covering the condenser at the bottom.
3 Low Heat Button
Press this button to reduce the temperature when
drying particularly delicate cotton or linen items.
In this case you should select a longer drying time.
4 Start Button
Press this button to start the dryer after having
selected the programme.
If the door of the appliance or the small door at the
bottom is opened while the programme is running,
this button must be pressed again after closing the
door(s) in order to restart the programme from the
point at which it was interrupted.
5 Full tank Light
This light illuminates when the reservoir is full or
incorrectly fitted.
6 Time Selector Dial /
On Off Switch
Around the knob there are two drying cycles, one of
up to 150 minutes at a high temperature for cotton
and linen, and one of up to 100 minutes at a low
temperature for synthetic fabrics. To set the machine
to the selected time, turn the dial clockwise until the
the knob pointer coincides exactly with the time you
want.
NEVER attempt to turn the dial in an
anticlockwise direction.
When selecting the drying time you should
remember that it includes a 10 minute cooling phase
(position
on the dial).
This phase should not be shortened, stopped or
avoided, as this could cause skin burns or damages to
the laundry.
On "O" position the dryer is switched off.
5
Hide quick links:
Advertisement
Table of Contents
