Replacing The Cleaning Liquid - Panasonic ES‑LV9QX Operating Instructions Manual

►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark (
securely attach the outer foil section to the shaver
until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil,
preventing complete attachment to the foil frame.
2. Align the foil frame mark (
( ) and securely attach together until it clicks.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
ES-LV9QX_ME.indb 17
) to the front,
) and the system outer foil mark

Replacing the cleaning liquid

If the STATUS lamp glows for 5 seconds when the SELECT button
is pressed, the cleaning liquid needs to be replaced.
• Even if the STATUS lamp does not light up, replace the cleaning
liquid after 6 months have passed.
1
Remove the AC adaptor and
remove the cleaning liquid unit�
(See page 11�)
2
Wash away the old cleaning liquid�
• It can be drained as sewage.
3
Rinse the cleaning liquid unit�
• Pour water as illustrated while tilting the
cleaning liquid unit and shaking it gently.
• You can clean with the cleaning liquid filter
removed.
After washing, be sure to attach the cleaning
liquid filter.
4
Gently wipe off any beard
trimmings attached to the inside
of the cleaning tray (a) with a
cloth or tissue paper dampened
with water�
• Clean the corners and uneven parts of
the cleaning tray with a cotton swab
dampened with water.
5
Prepare the new cleaning liquid�
(See page 11�)
1

17
3/6/2018 4:12:58 PM