Panasonic ES‑LV9Q Operating Instructions Manual page 26

Problem
The shaving sensor
responds even though
the shaver is not in
contact with the skin.
Operating time is short
even after charging.
Shaver does not operate
even after charging.
26
ES-LV9Q_EU.indb 26
Action
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water. (See page 18.)
Replace the system outer foil
and/or inner blades.
Expected life of system outer
foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
This can be improved by cleaning
every time after shaving.
When the number of operations
per charge starts to decrease,
the battery is nearing the end of
its life.
Use the appliance in an
ambient temperature
approximately 5 °C or higher.
The battery has reached the
end of its life.
The shaver will not operate with
the AC adaptor connected.
Please use the shaver after it has
been sufficiently charged and the
AC adaptor disconnected.
Problem
The shaving sensor is operating.
The driving sound
The sound changes depending
changes while shaving.
on the beard thickness.
Apply oil.
The blades will not move
smoothly when there is no oil on
the blades, requiring more power.
The shaver makes a high‑
pitched sound due to the linear
Makes a loud sound.
motor drive. This does not
indicate a problem.
Confirm that the blades are
properly attached.
Clean the system outer foil with
the brush.
The odor is getting This can be improved by cleaning
stronger. every time after shaving.
This can be improved by
cleaning every time after
Shavings fly out in all shaving.
directions. Clean the inner blades with the
brush when shavings are
adhering to the inner blades.
Apply oil.
Replace the system outer foil if
System outer foil gets hot.
it is damaged or deformed.
(See page 20.)
Action
2017/12/22 9:13:20