Panasonic Lumix S1H Series Operating Instructions Manual page 73

0 When the shutter button is pressed halfway, the camera shake alert icon
[ ] may be displayed on the recording screen.
If this is displayed, we recommend using a tripod, the self timer or the Shutter
Remote Control (DMW-RS2: optional).
We recommend turning off the image stabiliser function when using a tripod.
0
When the following function is being used, the image stabiliser function is not
0
available:
– [High Resolution Mode]
Image Stabiliser Settings
Set the image stabiliser operation to match the recording situation.
[ ] [
[Operation Mode]
[Body(B.I.S.) /
Lens(O.I.S.)]
[When to Activate]
[E-Stabilization
(Video)]
] Select [Image Stabilizer]
Sets the stabilisation movement (blur) to match the
recording method (normal, panning). (l 74)
[ ] ([Body])
[ ] ([Lens])
This can be set when using other manufacturer's lenses
0
with an image stabilisation function.
[ALWAYS]
[HALF-
SHUTTER]
Camera shake during video recording is corrected along
the vertical, horizontal, roll, pitch, and yaw axes through the
combined use of the in-lens, in-body, and electronic image
stabilisers. (5-Axis Hybrid Image Stabiliser)
The [ ] on the recording screen changes to [
0
while [E-Stabilization (Video)] is functioning.
The angle of view may become narrower if set to [ON].
0
Uses the in-body image stabiliser.
Uses the in-lens image stabiliser.
The image stabiliser is always
operating.
The image stabiliser operates when the
shutter button is pressed halfway.
DVQX1961 (ENG)
6. Image Stabiliser
]
73