Installation; System Requirements; Connect Trackman And Mouseman - Logitech TrackMan User Manual

1
Installation
Installation involves two steps: connecting your mouse and installing the
MouseKey software. You can install them in the order you prefer.
If you connect the mouse first, the left button works as Click. The other
two buttons function with hardware defaults until you install MouseKey:
the middle button as left arrow and the right button as right arrow.
MouseKey is specifically designed for MouseMan and TrackMan.
It
does
not work with any other mouse.
System Requirements
MouseMan and TrackMan connect to any Apple Macintosh equipped
with a standard ADB (Apple Desktop Bus) connector. This includes the
Macintosh SE, SE/30, Classic, Portable, and LC models as well as the
Macintosh II family (including the new Hsi).
MouseKey is compatible with Apple Macintosh system software version
6.0 or higher.
Connect TrackMan and MouseMan
To connect TrackMan or MouseMan, make sure your Macintosh is off.
Plug in the mouse cable to any ADB connector on your keyboard or on
your computer. The keyboard ADB port is shown below.
Note
According to Apple Computer Inc., you should never connect
or disconnect ADB devices while your Macintosh is on.
5