Advertisement
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
8
IMG-332642
9
IMG-332648
© Volvo Car Corporation
Align the front edge of the cradle at the rear edge of the joint
between the front and rear door sill panel.
Note!
Ensure that the tape does not adhere yet. At the same time
hook the cradle at the upper edge on the door sill panel with
the hooks.
Press the middle of the pieces of mounting tape.
Drill out the six marked out holes in the cradle using a Ø 6 mm
(15/64") drill bit.
Remove any swarf.
Side scuff plate- 31265625 - V1.3
Page 8 / 16
Advertisement
