Advertisement
A Digital TV Receiver or a Digital Satellite Receiver is able to
produces HD (High Definition) video signal with 480p, 576p,720p,
and 1080i formats. A Component (Y Pb, Pr) Connection is required
for this kind of setup. Note: This setup also support 480i/576i.
Using a Component Video cable, connect the Digital TV Receiver's
Y Pb, Pr jacks to the Y, Pb, Pr iacks on the TV Use the HD lN
connections.
Note: Component Video (Y, Pb, Pr) connections in HD lN connections
is necessary to view 480p, 576p, 720p, and 1080i formats. Note that
the ComponentVideo Input in Side Connections can only support
480i /576i format.
Using an Audio cable, connect the Digital TV Receiver's AUDIO OUT
iacks to the TV's AUDIO lN jacks in HD IN connections.
Plug the power cable into AC inlet on LCD TV set. Plug the power
cable into an oudet and switch TV set on.
Use AV button on the remote control to select HD to watch DVD.
Note: The Y, Pb, P. jacks do not provide audio, so audio cables
must be connected to orovide sound.
tr;3
ll;-F-r*-_f
o @ o --l
4
|
Digirnl Satellit€ Receiver with HD output
1
2
3
4
Hl ;r"-
F
fs>
-
t , ! l l
T =
q4Fql
q
o @ o
o o @
This LCD TV can be used as a PC monitor. Your comguter will
have to equipped with a VGA type video output and VGA cable.
I
Using a VGA cable (not supplied). connect PC's VGA OUT connector
r
to the VGA connector on rhe TV. Use the PC lN connecdons.
t
Using a MIN|-JACK rype AUDIO cable (not supplied). connecr the
rC
PC's AUDIO OUT conneclor to the AUDIO connecror on the TV.
Use the PC lN connections.
?
Plug the power cable into AC inlet on LCD TV set. Plug the power
t
cable into an outlet and switch TV set on.
A
Use AV butron on che remote control to select PC to use your LCD
T
TV as a PC monitor.
Note: Please refer to "Setting Up the PC Mode" section for all the
supported PC display modes. lf possible, use the 1280 x 720@50H2
video mode to obtain the best PC image quality.
|;r;j@
| |
'
. t . . l
F E I
H ""-"lN Rt
@ N -
GD
&
Computer
Advertisement
