Advertisement
To engage reverse (R), wait for the
vehicle to stop and, from neutral,
move the lever to the right and then
backwards, lifting ring A of the
reverse inhibitor device.
WARNING
Fully depress the clutch
pedal to change gears
correctly. Therefore, the floor
area underneath the clutch
pedal must not be obstructed
in any way. Ensure that the
floor mat is always laid flat
and does not interfere with use
of the pedals.
110
Do not drive with your
hand resting on the gear
lever as the force
exerted, even if slight, could
lead over time to premature
wear of the internal gearbox
components.
The clutch pedal must be used
only for gear changes. Do not
drive with your foot resting on
the clutch pedal, however
lightly.
For versions/markets where
provided, the electronic clutch
control could intervene,
interpreting the incorrect driving
style as a fault.
LOADING ADVICE
The vehicle has been designed and
type approved on the basis of
certain maximum weights (see
"Weights" table in the "Technical
Specifications" section):
– kerb weight
– payload
– maximum weight on front axle
– maximum weight on rear axle
– towable weight.
WARNING
Each of these limits
must be kept firmly in
mind and, in any event, never
exceeded.
Hide quick links:
Advertisement
