Toolbar (Footer); Header With Scale Status - Siemens SIMATIC S7-1200 Manual

7 Operating the Application
7.1 Overview
7.1.1

Toolbar (footer)

The toolbar consists of 7 buttons:

Via
function.

Via
screen.

Via

The scale can be set to zero via
does not display precisely 0 g because of soiling.

The scale can be tared via
weight difference is saved as tare weight. This function is required to determine
the net weight (content of the container). These buttons are only visible when
taring the scale.

The taring can be deleted via
show the gross weight again (weight of container + content). These buttons are
only visible when taring the scale.

Via

You can toggle between German and English via
7.1.2

Header with scale status

The header provides you with information on the current screen and the status of
the weighing module.
Figure 7-2
1
2
3
The header shows the following:
1. Screen name
2. Screen icon (identical with the button icon in the toolbar)
3. Local time of the controller
4. Tara: Tare value display (weight of the container during taring)
5. Limit value 1 (configurable via SIWATOOL V7)
6. Limit value 2 (configurable via SIWATOOL V7)
Weighing, Controlling and Logging (Set 6)
Entry ID: 82454336, V2.0,
you get to the recipe view. This is where you can execute the teach
you get to the display of the filling process. This is also the start
you get to the overview of the "Data Log" process data logging.
you get to the quick start menu of the weighing module.
10/2017
. This is used when the scale is empty but
. This is where scale is set to zero and the
. The tare value is deleted and the scale will
.
7 8
4
5 6
10 11 13 14
12
9
44