Download Print this page

NCR 7603-K240 Kit Instructions

120gb solid state device

Download this manual

KIT INSTRUCTIONS

120GB Solid State Device

7603-K240

Issue A

Table of Contents

Page 1 KIT INSTRUCTIONS 120GB Solid State Device 7603-K240 Issue A...
Page 2: Revision Record
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
Page 3: Kit Contents
120GB Solid State Device Introduction This kit provides the components to add a solid state device to the RealPOS XR5 POS. Kit Contents...
Page 4: Installation Procedure
120GB Solid State Device Installation Procedure Warning: Disconnect the AC power cord before disassembling the Terminal. Caution: Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer’s case for a few seconds. Avoid any contact with internal parts and handle cards only by their external edges.
Page 5 120GB Solid State Device 5. Connect the SATA Data and Power Cable to the SSD and to the Motherboard. 6. Install the SSD Assembly on the Top Cover (2 thumbscrews). 7. Close the Top Cover.