One Push Setting
One push setting can simplify operation. You can set desired function as one push setting that can use easily in
each time.
To Save:
➊
➋
To set:
➊
➋
To cancel:
➊
➋
Notes:
" will flash in the display window after finishing. Press Stop/Reset button if you do not save
1. "
program as one push setting.
2. If one push setting is saved, "
3. Only one program can be set to one push setting. Previously one push program will be covered when
a new program is saved.
4. One push program will remain if powered off.
5. One push setting are used for all functions. (only except Steam Shot)
" will flash in the display window
"
after finishing. It means you can save
program as one push setting.
" will stop flash in the
"
display window when press
button 2 seconds. Program has
saved successfully.
Press Start/Set button and saved
program appears in the display
window.
Press Start button to cooking.
Press Start/Set button and saved
program appears in the display
window.
Press the button 2 seconds and
cancel one push setting.
" will flash in the display window.
- Eng-20 -
Example: Saved
"Steam-Low" for 3
minutes
Example: Cancel
saved "Steam-Low"
for 3 minutes