Reach Wand; Powered Head/Accessory Release Clip; Powered Head - Hoover Cruise Series User Manual

Using as a reach pole vac
The reach wand can be used for hard to reach places.
Press the Power Head/
accessory release clip
and pull to remove the
Powered Head from the

reach wand.

Squeeze the trigger
located underneath the
handle, the machine will
switch 'On'. The On/
Off and charging light
will illuminate green
indicating the power is
on and the machine is
charged. Release the
trigger to switch the
machine 'Off'.
Choose an accessory
(pictures illustrated
dependent upon model).
Squeeze the trigger and
push the 'Continuous
power latch' towards
the trigger. This will lock
it into the 'On' position
and will continue to
power the machine
without having to hold
in the trigger. Push the
latch away from the
trigger to unlock and
release the trigger.
The upright slim vacuum cleaner is not free standing
and in between uses must always be placed in the wall
bracket or laid flat on the floor, in a suitable location so
it does not become a trip hazard or can be stepped on.
OPERATION
Push the chosen
accessory into the
reach wand until it
clicks into place.
8
The reach wand
can be used for
hard to reach
places and at
different heights
for above
floor cleaning.