Close The Ams Asset Monitor; Recommended Sequence For Installing The Ams Asset Monitor - Emerson AMS Installation Manual

Installing AMS Asset Monitor hardware
April 2020
4.5

Close the AMS Asset Monitor

Prerequisites
• A PZ 3 cross-tip screwdriver for the door screws.
Procedure
1. If the door has been removed completely, hang the door on its hinges.
2. Secure the lower hinge with the circlip.
3. Close the door and secure it by fastening the screws.
4.6 Recommended sequence for installing the AMS
Asset Monitor
The described installation sequence is a recommendation and can be changed to the
needs of your project.
Procedure
1. Remove the door of the AMS Asset Monitor.
2. Mount the AMS Asset Monitor.
32
Figure 4-9: Reattach the door
A. Mounting direction
B. Screws for securing the door
C. Circlip
Tighten the screws until the door touches the base, and is squeezed to ensure a
proper seal.
Installation Guide
MHM-97923-PBF
MHM-97923-PBF, Rev. 1.0